“CONDOR” SB1002-R4

“CONDOR” SB1002-R4

Rugged, Small, High-Speed I/O System with Quad Removable Drive(s)

Features

Computing Features
- Up to 2.4GHz Intel® Quad Core i7™ Haswell processor with 6MB of L2 Cache
- Up to 32GB of 1600MHz DDR3 memory with ECC
- Up to 1TB of fixed SSD for OS boot
- Up to 8TB of removable SSDs as four individual drives or as single canister (optional) 

System I/O
- Four USB 3.0 and six USB 2.0 ports with power
- DisplayPort for ultra-high resolution video
- Seven Gigabit Ethernet ports with TCP/IP Offloading Engine (TOE)
- Dual DVI/HDMI ports and one RGB video port
- Two serial ports with RS-232/422/485 options and eight buffered general purpose I/O lines
- Support for dual redundant SDI video outputs (opt., lose one DVI/HDMI)
- Two SAM™ sites for custom I/O (MIL-STD-1553, Wi-Fi/BT, GPS, etc.)
- Full HD-audio support with onboard 1W mono amplifier

Additional Features
- Real time clock (RTC) with field-replaceable battery
- Dual BIOS boot devices with write-protect
- Support for Active Management Technology (AMT) for remote KVM functions
- Intel® Virtualization Technology (VT-x/VT-d2) and Trusted Execution Technology (TXT)
- Trusted Platform Module (TPM) for secure operation (optional)
- Tamper-proof hardware with optional secure-erase
- Full power-management control for sleep/hibernate operation
- Fully compliant to MIL-STD 810G, MIL-STD 1275D, MIL-S-901D, DO-160D, MIL-STD 461E and IP66
- CPU temperature and voltage monitoring with status LED indicators
- Reset and power on/off signal with suspend support

SWaP
- Ultra-low SWaP only 5.4” x 6.5” x 4.0”, @ 5 lbs. and as low as 40W total
- Operates at standard temp -20°C to +75°C or extended temp -40°C to +85°C (optional)
- Available in ruggedization levels R3-R5

Download Datasheet

Download
“CONDOR” SB1002-R4

  • Application

    The Condor is designed to provide the ultimate Network Attached Storage (NAS) or data-logging rugged computer system for defense and UAV applications, as well as industrial and commercial applications. The Condor is the next generation of the Golden-Eye III, which is widely deployed in Army WIN-T vehicles, robots for hazardous applications where the computer is exposed to harsh environments, and UAVs, where power, weight, and size are the main considerations. The SB1002-R4 is ideal for outdoor applications where it may be fully exposed to rain, sun, dirt, and radiation. This system may be ordered from the factory with operating systems such as Windows®, Linux® or VMware® pre-installed. The SB1002-R4 is fully compliant to MIL-STD 810G, MIL-STD-1275D, MIL-S-901D, DO-160D, MIL-STD-461E and IP66.
  • General Description

    The SB1002-R4 "Condor" is a fifth-generation, ultra-rugged, small, lightweight computer system. It is designed to provide up to 8TB of storage along with high-speed I/O such as USB 3.0, Display Port, and removable drives, while providing the highest level of workstation performance possible in a fully ruggedized, conduction-cooled, sealed system, operating from -40°C to +85°C (-20°C to +75°C standard). This system is designed for applications that require a small, ultra-rugged enclosure with the highest possible performance per dollar and per watt while utilizing rugged interconnects to provide a fully sealed system.
     
    The Condor supports the latest, most power-efficient Intel® Quad Core™ i7 Haswell processor with Hyper-Threading for a total of 8 logical cores, each operating at up to 2.4GHz with the ability to TurboBoost up to 3.4GHz. To harvest this incredible CPU performance, the CPU is coupled with up to 32GB of RAM organized in two banks that support error correcting code (ECC). The ECC RAM provides 2-bit error detection and 1-bit error correction and supports up to 1600 mega-transfers per second (MTS) between CPU and memory. The high-speed I/O is made possible via a new interconnect technology which utilizes differential blades housed in a rugged MIL connector. This advanced interconnect maintains the signal integrity of the high speed I/O over both interconnects for reliable high-speed I/O.
     
    The I/O subsystem for the Condor is designed to support a wide array of standard and custom I/O functions. The SB1002-R4 configuration supports four USB 3.0 ports and one DisplayPort for ultra-high video resolution up to 3840 x 2160 via a high-speed, rugged MIL blade connector. The SB1002-R4 standard configuration supports a total of seven Gigabit Ethernet channels with TCP/IP Offloading Engine (TOE), six USB 2.0 ports, up to 8TB of removable SSDs as four individual drives or as single canister (optional). Additional standard I/O functions included are eight buffered digital I/O lines, dual DVI/HDMI or one DVI/HDMI and dual redundant SDI (SMPTE-259/292/424/425) (optional, lose one DVI/HDMI) outputs and one RGB video port, two COM ports with RS-232/422/485 options, and an HD-audio headset jack and a 1-watt audio amplifier to drive an 8-ohm speaker directly. Additional I/O functions include up to 1TB of onboard SSD for OS boot with write-protect and secure-erase, as well as two SAM™ sites for custom I/O such as Wi-Fi/Bluetooth, GPS, Quad Video capture, CANbus, MIL-STD-1553, FireWire, etc.
     
    The Condor also supports the most secure storage subsystem possible. The system supports mSATA as a boot device, as well as a dual redundant BIOS flash with hardware write-protect and tamper-proof functions. In addition, the SB1002-R4 supports up to two removable or fixed drives with tamper-proof security functions. A hardware tamper-proof circuit enables the security functions of the system to prevent access to any of the stored data on the system. These data security functions, along with the Trusted Platform Module (TPM) and the Trusted Execution Technology (TXT), make the Condor the most secure high-speed system on the market.
  • Technology Used

    The Condor utilizes the Intel® Core™ i7 Haswell CPU, which is the newest and most powerful, efficient processor from Intel® with advanced thermal management and graphics. The Haswell Core™ i7 processor supports Hyper-Threading for a total of eight logical cores and supports 6MB of L2 cache shared among the cores. Haswell supports up to 32GB of DDR3 RAM with error correcting code (ECC) and 1600 mega-transfers per second (MTS) between the CPU and RAM. Another major improvement of the Haswell processor over the Ivy Bridge Core™ i7 is the graphics performance. The Haswell processor provides three independent video outputs and better-than-40% improvement in 3D acceleration. Haswell is also coupled with Lynx Point™ and is a fourth-generation Core™ i7 with a fully integrated memory controller for the best memory performance possible. This CPU is considered the workhorse of the workstation market with many added power-saving features and peak performance with controlled thermals, as well as security functions such as Intel’s second-generation Virtualization Technology VT-x, Trusted Execution Technology (TXT), and Active Management Technology (AMT) for remote KVM functions. The Haswell platform also supports PCIExpress Gen3, USB 3.0 and SATA 3 for the highest performance possible on a workstation platform.
  • Cooling

    The Condor system is equipped with GMS' patent pending RuggedCool™ technology, which is the most unique cooling system in the industry and is the only system that operates up to -40°C to +85°C at full load without throttling the CPU! This cooling approach provides the lowest thermal resistance to the case while providing the highest shock specifications known in the industry. The SB1002-R4 is a fan-less system for reliable operation and can be mounted directly to a metal surface or used as a stand-alone system.
  • Sales Inquiry

    Thank you for visiting GMS, we appreciate your interest in this product.  

    For further information about this product, please contact your local sales representative or submit a pre-sales inquiry form and someone from our sales team will be in touch shortly.

 

 

 

 

Our Mission

Since its inception in 1979, General Micro Systems, Inc. (GMS) has been true to its mission statement: To Become the World’s Leading Technology Independent Supplier of Computing Engines, while Providing the Best Price/Performance, Quality and Customer Support, Demanded by Our Current and Our Future Customers.

All GMS products are proudly designed and manufactured in the U.S.A.

Contact Us

General Micro Systems, Inc.
8358 Maple Pl. Rancho Cucamonga, CA 91737

Local (909) 980-4863
Toll Free (800) 307-4863

General Inquiry - This email address is being protected from spambots. You need JavaScript enabled to view it.
Sales Inquiry - This email address is being protected from spambots. You need JavaScript enabled to view it.

All designs, images and logos © Copyright 2019, General Micro Systems, Inc. All rights reserved.