Rugged, Fully Sealed, 4-Port Router and 12-Port Managed Switch with PoE and Cisco ESR
- Embedded Intel® Atom-based Cisco Embedded Services Router (ESR) 5921
- Cisco® ESR architected for medium duty cycle, low power and mobile platforms
- Runs Cisco IOS® Software with Radio Aware Routing to implement Mobile Ready Net
- Performance and power balanced with 1.91 GHz Intel® Atom™ Quad Core processor with 2MB of L2 Cache and 4GB of 1333 MHz DDR3 SDRAM with ECC
- Fixed mSATA high speed SSD for router software
- Four Gigabit Ethernet ports with TCP/IP offloading engine
- Two 10 Gigabit Ethernet ports with TCP/IP offloading engine
- 12-port Layer 2/Layer 3 Managed Switch, 4 ports with IEEE 802.3at Power-over-Ethernet and built-in Power Sourcing Equipment (PSE, 56V nom.; 25.5W)
- One COM Service Port with RS232/RS422 support
- Panic Option for Zeroizing the Router
- LED indicator status for Power and Pass/Fail
4-Port Router Functions
- Embedded Intel® Atom™-based Cisco® Embedded Services Router (ESR) 5921 software router
- Cisco® ESR architected for embedded and mobile platforms runs Cisco IOS® Software form ad hoc Mobile Ready Net for secure data, voice and video
- WAN optimization eliminates redundant traffic to improve performance and optimize “on time” power
- Support for radio-aware routing (RAR) for traffic prioritization over degraded networks
- Self-forming, self-healing, and ad hoc networks eliminate excessive configuration
- Supports all major routing protocols, including: OSPF, RIPv2, BGP, EIGRP-IP, Cisco® discovery, and multiple IP routing and multi-cast versions
- IPv6 routing, Cisco® Express Forwarding, QoS, tunneling support and IOS® Zone-Based Firewall assure full feature routing and interoperability with distant LANs
- Router programmable via COM port or Ethernet LAN
Enterprise Managed Layer 2/Layer 3 Switch
- High-Performance stacking with Fast failover within 100ms
- Unicast, multicast and spanning tree capabilities
- Very low latency, VLAN support, QoS/differentiated services
- Internal shared memory buffer (8 queues per port)
- Security features for authentication and authorization
- Jumbo frame support
- High-speed frame processing via a 416MHz MIPS processor
- 128MB of DDR2 memory for large frame buffering
- 16MB of flash NVRAM for system configuration
- DHCP client and server support, and SNMP
- Web GUI and SNMP management interfaces
- Switch programmable via COM port or Ethernet LAN
SWaP-E (Size, Power and Weight – Efficiency)
- Greatest networking density with Gigabit and 10 Gigabit ports with Power over Ethernet (PoE)
- Ultra-low SWaP at 5.4” x 6.5” x 1.7”, @ 2 lbs. and as low as 15W (PoE not active)
- MIL-STD-810G, MIL-STD-1275D, MIL-S-901D, DO-160D, MIL-STD-461F, IP66 compliant
- Operates up to extended temp -40°C to +85°C (Optional)
- Available in ruggedization levels R1-R5
The RT0402 Stingray is intended for military/defense/aerospace deployed computer networks. With the onboard 1 and 10 Gigabit Ethernet ports, Stingray is an ideal forwardly-deployed vehicle-mounted battlefield dual-server that offers the greatest Size, Power and Weight Efficiency (SWaP-E), while offering the most amount of flexibility in the same dense form factor. Stingray can also be used in Internet-of-Things, industrial and commercial platforms where PoE, TOE, and intelligent local routing is needed. It can be mounted virtually anywhere—including on telephone poles and powered by solar panels to form an Internet-of-Things Intelligent Gateway. The RT0402 is fully compliant to MIL-STD-810G, MIL-STD-1275D, MIL-S-901D, DO-160D, MIL-STD-461E and has ingress protection up to IP66.
The 4-port, 1 Gigabit Ethernet router is based upon Cisco’s Embedded Services Router (ESR) 5921 software router that’s designed for low-power, embedded and mobile applications. A software router intended for medium-duty applications, ESR runs Cisco® IOS® Software to enable Cisco’s Mobile Ready Net—a concept of loosely-coupled nodes that can self-form to create a network (including over radio-based links). The router’s functions are what designers expect: all applicable IPv6 capabilities and protocols, the industry’s most common routing algorithms and protocols including OSPF, RIPv6, BGP, multi-cast, and more. The ESR 5921 puts special emphasis on working in systems where the LAN connectivity—wired or wireless—is unreliable, constantly changing, or simply unknown. Features in the 5921 software set optimize routing for ad hoc networks, degraded packets, and gives priority and QoS to data, voice and video packets (depending upon programming).
In RT0402 Stingray, programming is accomplished by a full-featured embedded single-board computer. Cisco’s 5921 Embedded Services software Router (ESR) is running on an Intel® Quad Core Atom™ processor with 2MB of L2 cache operating at 1.91GHz. The CPU features deep sleep capabilities for ultra-low power consumption when not active. The CPU is coupled with 4GB of 1333MHz DDR3 RAM with Error Correcting Code (ECC). Local non-volatile storage is used for ESR code, routing tables, and other network configuration parameters. Besides hosting the ESR router, the processor interfaces to a 4-port Ethernet switch via an Intel® I210 Gigabit Ethernet controller. There is no internal connection between the router and the separate 12-port Gigabit Ethernet switch: all connections are done externally by the user for maximum flexibility. The router is programmed via LAN or optional RS232 serial port.
On the Ethernet switch side, it is designed to provide two 10G XAUI ports and 12-ports of 10/100/1000 Mbps Ethernet with Power over Ethernet (PoE, IEEE 802.3at at 56V nom.) on four of the 10/100/1000 interfaces in a fully ruggedized, conduction-cooled, sealed system, operating from -40°C to +85°C. This system architecture simplifies networking applications that require the most advanced routing device that can act as a switch without intelligence, an intelligent switch with up to Layer 3 features and as a router with up to Layer 8 features all in the same ultra-dense form factor.
The RT0402 switch side is equipped with a 416MHz MIPS processor with 128MB of DDR2 memory for large frame buffering and 16MB of flash NVRAM for system configuration of the managed switch. In addition, using multistage Versatile Content Aware Processing (VCAP), Stingray delivers VLAN and QoS processing, enabling the delivery of differentiated services, security through intelligent frame processing, and egress frame manipulation—all at wire speed with no CPU intervention once programmed.
The switch portion on Stingray is designed to provide users remote access to the switch with full management access via either Ethernet or an RS232 serial interface, and provides for a browser-based GUI and SNMP management.
Stingray utilizes two types of independent hardware technology to provide both routing and managed switch functions.
To enable routing functionality, RT0402 employs the most efficient Quad Core Atom™ processor from Intel®. The Intel® Atom™ Bay Trail CPU is a third-generation Atom™ processor with a fully integrated memory controller, 2MB of L2 cache operating at 1.91GHz and deep sleep capabilities for ultra-low power consumption when not active. The CPU is coupled with 4GB of 1333MHz DDR3 RAM with Error Correcting Code (ECC) and the Atom™ processor hosts the Cisco® ESR 5921 routing software and interfaces to the VSC7434 switch externally via a user-connected Ethernet connection.
For the RT0402, Stingray leverages Microsemi’s VSC7434 E-StaX-III-48 next-generation Enterprise Ethernet switch, Stingray utilizes 12-ports 10/100/1000 Mbps (four with PoE+) and two ports of 10G XAUI. The XAUI ports can also be configured as two 12Gbps stacking ports. This technology is supported via a 416MHz MIPS processor with 128MB of DDR2 memory for large frame buffering and 16MB of flash NVRAM for system configuration of the managed switch. In addition, the VSC7434 has very low latency, less than 100ms failover, and multistage Versatile Content Aware Processing (VCAP), which delivers VLAN and QoS processing, enabling the delivery of differentiated services, security through intelligent frame processing, and egress frame manipulation.
Router Functions and Specifications
ESR 5921 software router is used to implement Cisco’s Mobile Ready Net, a loosely-coupled ad hoc network designed to be self-forming and self-healing as nodes appear and disappear. IP multiplexing minimizes redundant packets to maximize available bandwidth, while radio-aware routing moves packets based upon link conditions. There are up to 32 VLANs supported per router, with IPv4/IPv6 packets and a Cisco® iOS Zone-based firewall. Routing protocols include: RIP v1 and v2, OSPF, EIGRP, BGP, Cisco® Discovery Protocol, IP Policy and Multicast Protocol Independent Multicast (IGMP) v1, v2, v3, and Cisco® Group Management Protocol. Security protocols include IPSec, SSL/TLS, SRTP, 3DES, AES and IKE. Voice, video and data packets are supported, and address conservation includes NAT (Many-to-One and Many-to-Many), DHCP and Easy IP Phase 1. ESR 5921 is optimized to run on the Intel® Atom™ on Linux with a small memory footprint.
RuggedCool℠ Cooling Technology
The Stingray router/switch is equipped with GMS’s patent-pending RuggedCool℠ technology, the industry’s most unique conduction cooling system promising system operation over -40°C to +85°C. RuggedCool℠ provides the lowest thermal resistance to the case, keeping the CPU within temperature limits at full load, while still providing the highest shock specifications known in the industry. The RT0402 is a stand-alone, fan-less system and should be mounted directly to a metal cold plate surface that provides a reliable conductive thermal path.
Full Environmental Specs
The Stingray is available in ruggedization levels R1-R5. Additional information regarding the ruggedization levels and full environmental specifications for this product can be found on our website at www.gms4sbc.com/technologies/ruggedization.